Quality

Furniture QC Checklist: A 9-Point Inspection Process

Quality is not a final glance at the end — it is a sequence of checks that catch problems while they are still cheap to fix.

Home / Resources / QC Checklist

The strongest question you can ask a factory is not "do you do QC?" but "where in the process do you check?" A disciplined factory checks at defined points, because each stage of production can hide a defect that the next stage makes worse.

The nine checkpoints

  1. Incoming material inspection — boards, veneer and hardware are checked on arrival before they enter production.
  2. Panel cutting QC — dimensions and squareness are verified after cutting.
  3. Edge banding QC — edges are checked for adhesion, alignment and trimming.
  4. Drilling & assembly fit — hole positions are confirmed so components assemble cleanly.
  5. Surface finish QC — melamine, veneer and lacquer surfaces are inspected for scratches, colour and gloss.
  6. Pre-assembly test — a sample of each batch is assembled to confirm fit and function.
  7. Hardware & accessories — hinges, runners and fittings are counted and checked.
  8. Packaging & drop test — cartons are drop-tested to a mail-order standard (ISTA-3A).
  9. Final AQL inspection — finished goods are sampled against an agreed Acceptable Quality Limit before release.

Self-inspection vs third-party

A good factory runs its own checks at every point above. For larger orders, many buyers add a third-party inspection at pre-shipment as an independent confirmation. The factory’s internal process and your external check are complementary — neither replaces the other.

What to ask for at sampling

  • A pre-production sample you approve against your spec.
  • The AQL level the factory will use for final inspection.
  • Documentation — photos or reports — of the checks run on your order.

See how this fits into the wider flow in our sourcing guide, or browse the ranges we produce under this standard: TV units, sideboards, bedroom and office.

Ask about our QC process

We’ll walk you through the nine checks and share sample inspection reports.

Get in Touch